All electrical products into the Australian market must comply with SAA certification, Xing Yuan Electronics to provide professional SAA certification services. Now, to tell you about SAA certified product range.

 

1, the control of electrical appliances:

 

Controlled appliances must obtain the certificate of approval issued by the monitoring department (certificate of approval), and provide identification (must be marked with a certificate number). It should be noted that the certification process is specific to safety, not performance or quality, unless it is safety related. The first letter of the certificate number shows which state or region the certificate is issued. Such as:

 

Q91610 (Queensland)

 

W2015 (Western Australia Western Australia)

 

N10422 (NewSouthWales, New South Wales)

 

2, non-controlled electrical appliances:

 

Uncontrolled products, although not compulsory certification, but its security by the vendor / producer is responsible for voluntary certification. The monitoring department will issue a Certificate of Suitability for the products that meet the standard requirements.The electrical products that have obtained the certificate of compliance can be marked with the certificate number and the last letter of the certificate indicates the state or region where the certificate is issued,

 

CS / 431 / Q (Queensland)

 

CS / 108 / N (New South Wales)

 

RCM Marks: Australia and New Zealand are currently introducing the Regulatory Compliance Mark for the uniform identification of electrical products, a trademark owned by regulators in Australia and New Zealand, indicating that the product meets both regulatory and EMC requirements and is non-mandatory . After the product has been certified for safety and EMC registration, the RCM mark may be requested through a regulatory body that issues a safety certification or "RCAgistrar" (StandardsAustralia).

 

SAIGLOBAL logo: is a product safety mark issued by SAI (formerly SAI). This logo is optional and requires factory inspection.

 

Energy requirements apply to the following household appliances:

 

Refrigerators and freezers (test standards: AS / NZS44741.1, AS / NZS4474.2)

 

Washing machine (test standards: AS / NZS2040.1, AS / NZS2040.2)

 

Dryer (test standard: AS / NZS2442.1, AS / NZS2442.2)

 

Dishwasher (test standard: AS / NZS2007.1, AS / NZS2007.2)

 

The one-way home air conditioners (test standards: AS / NZS3823.1.1, AS / NZS3823.1.2, AS / NZS3823.2, AS / NZS3823.3) Applicants must submit the application form to the monitoring agency with a complete and correct test report and Sample of energy label. The test report must be issued by an accredited laboratory and valid for three years from the date of issuance.