Specification for the size of CE marks
 

　　After the CE label of toy products was put into practice in Europe in 1990, there has been a strict trend in practice at present. However, when domestic toy manufacturers printed CE marks on their products or packaging, they were not made in accordance with the relevant size regulations. We hereby urge domestic manufacturers to pay attention to the CE logo, trade name, trade mark, European agent and importer's address on the toy, which must be pasted or printed on the toy body or other packaging in a clear, legible style. If the size of the toy is too small or the toy is made up of small parts, the relevant information can be printed on the toy package or recorded. The European city has a packaging requirement on the size of the CE logo, in which the CE character height must be at least 5mm. And the total length of the CE word shall not exceed the width of the 12mm / CE font and shall be not less than 1 / 5 cents. At least a fifth of the height (in this case, at least 20 × 1/5=4mm), with a outer radius of 10 mm, and a cross column with at least 80% of the outer radius (10 × 0.8=8mm), and a CE mark of 2 cm in height, The contents of the mark shall include warnings and notes printed in the local market. Manufacturer or authorized agent, importer name, trade mark and address. A regulated CE.