< strong > labeled with < a href = "http://www.globalgd.com/" > the relevant requirement of CE marking < / a > < / strong > < / span > < br / >
1, “ CE” Marks are everywhere. All products covered by the new Methods Directive must be affixed before they are placed on the market. CE” Logo, “ CE” A mark that is not intended to achieve a commercial purpose and is not a mark of origin is considered a legally qualified mark in the law of the European Union. All new products must be affixed before they are put on the market. CE” Logo (whether the product is produced by a member state or by another country). In addition, all used products imported from other countries and all significantly modified products (which can be considered new products) are required to be affixed before marketing. CE” Sign.
2, “ CE” Signs must be posted in a prominent position “ CE” The logo must be affixed by the manufacturer or an appointed representative located in the European Union. The manufacturer (within the EU or from outside the EU) is ultimately responsible for bringing the product into conformity with the basic requirements of the Directive, and the manufacturer may also appoint a plenipotentiary representative within the EU, the person responsible for placing the product on the market shall bear the responsibility of the manufacturer.
In principle, in order to ensure that products comply with all the requirements of the relevant directives, all conformity assessment procedures must be completed before products can be affixed “ CE” Sign. Paste “ CE” The marking work is often done after the production phase. For example, start with “ CE” The mark is pasted on the parameter label, and the &ldquo will be sent after the direct inspection is completed. CE” The logo is affixed to the product. But what if “ CE” The mark is affixed with the stamping or casting method to form an integral part of the product or part, then the mark can be affixed at any stage of the production of the product, as long as the conformity assessment procedure throughout the production process to verify that the product is qualified.
& other; CE” The mark indicates that the product complies with the most basic public interest covered by the Directive and can therefore be regarded as the basic information transmitted to the authorities and relevant bodies of the Member States, thus requiring the affibbling of the product “ CE” The logo must be in a prominent position, legible and not easily daub. In general, “ CE” The logo is affixed to the product or its parameter label, if it cannot be “ CE” The logo is affixed directly to the product, and may also be affixed to the packaging of the product or to the documentation accompanying the product, subject to certification “ CE” The reason why the logo cannot be affixed to the product, such as certain explosive items, or because it is subject to certain technical and economic conditions, or because it cannot be guaranteed to be achieved; CE” The size requirements of the logo or the requirements that the logo cannot be clearly recognizable and not easy to alter, in these cases, can be “ CE” The logo is affixed to the package or attached document.
3, “ CE” The minimum height of the sign shall not be less than 5mm, and if it is reduced or expanded, it shall be carried out in proportion
Depending on the conformity assessment procedure adopted, the designated organization may participate in conformity assessment activities at the design stage, the production stage or in the design stage and the production stage in its entirety. If the designated authority is involved in the conformity assessment procedure at the production stage, the designated authority number shall be placed at “ CE” After the logo, but subject to some regulations, “ CE” The mark may also not be followed by the number of the designated body involved in conformity assessment. Sometimes more than one designated authority may be involved in conformity assessment at the production stage, in which case there may be more than one applicable directive, “ CE” The logo will be followed by several numbers.
& other; CE” The mark and the number of its designated body may also be affixed in other countries, i.e. if the product is a conformity assessment activity carried out in that country by a designated body in Europe in accordance with the requirements of the directive, “ CE” Signs can be affixed in this country.
4, “ CE” The mark replaces the member's mark of conformity “ CE” The mark is the only sign that the product complies with the European Directive (replacing all national regulations), which means “ CE” The mark shall replace all marks that comply with national regulations (such as the GS mark in Germany). Member States should “ CE” The logo is incorporated into its national regulations and administrative procedures. Other marks may be affixed to the product, but the following conditions must be met:
& middot; The logo has the distinction of “ CE” The different functions of the mark provide additional value to the mark, such as environmental issues not covered by the directive.
& middot; It is affixed with legal signs that are not easy to cause confusion, such as manufacturer's protective trademark.
& middot; These marks shall not differ in meaning or form from “ CE” Logo confusion.
