Hanging basket, window cleaning machine is a new type of high working equipment that can replace traditional scaffolding, reduce labor intensity, improve work efficiency, and can be reused. At present, the use of such equipment has gradually become a trend, and has been widely recognized in the external wall construction, curtain wall installation, thermal insulation construction and maintenance and cleaning of external walls of high-rise multi-storey buildings, and can be used in the operation of large tanks, Bridges and DAMS. Using this product, scaffolding can be avoided. The construction cost is greatly reduced, and the construction cost is only 28% of the traditional scaffold, and the work efficiency is greatly improved. The hanging basket is flexible in operation, easy to shift, convenient and practical, safe and reliable. With the
Construction machinery CE certification institutions to learn about it!
Safety device
1, swing arm safety lock; Able to tilt the working platform at an Angle greater than 3-8° Lock the safety wire rope when the work wire rope is broken;
2, manual sliding: can fall smoothly when the power is lost, such as power failure, to ensure that the operator reaches the ground safely;
3, speed limit protection: when the falling speed exceeds the limited safety speed, start the centrifugal deceleration device to slow down the speed;
4, limit protection: when the hanging basket equipment exceeds the manually set maximum limit, automatically cut off the power supply and start the alarm bell;
5, electrical overload protection: If the motor is abnormal or the circuit is abnormal so that the motor encounters overload, disconnect the control circuit of the contactor to disconnect the main circuit.
6, leakage protection: the operator accidentally live body and leakage case automatically closed the total circuit;
7, emergency stop protection: in the event of sudden abnormal conditions (such as automatic rise or fall, etc.) cut off the main control loop.
BMU and TST Main test categories
Suspension platform type test
Type test for hoist and back-up
suspension rig type test
< strong > < a href = "http://www.globalgd.com/cerenzhengbiaozhun/" > main applicable instructions: CE certification < / a > < / strong > < / div >
[√] Machinery Directive 2006/42/EC
[2006/42/EC] Effective 29 December 2009, replacing 98/37/EC.
[√] Electromagnetic Compatibility Directive 2004/108/EC
[√] Low Voltage Electrical Directive 2006/95/EC