Shovel and transport machinery Such as bulldozers (which can be divided into wheeled bulldozers and crawler bulldozers), scrapers (which can be divided into crawler self-propelled scrapers, tire self-propelled scrapers and towed scrapers), loaders (which can be divided into wheeled loaders and crawler loaders, graders (which can be divided into self-propelled graders and towed graders), transport vehicles (which can be divided into single-axis transport vehicles and two-axis traction transport Truck), flat truck and dump truck, etc.
< strong > < a href = "http://www.globalgd.com/" > engineering machinery CE certification < / a > sign requirements: < / strong > < / div >
* The CE mark must be affixed in a prominent position on the product, which should be clear and legible and not easy to apply. Under normal circumstances, the CE mark is affixed to the product or its parameter label; If the CE mark cannot be affixed directly to the product, it can also be affixed to the packaging of the product or the documents accompanying the product, provided that the reason why the CE mark cannot be affixed to the product is proved.
* The minimum height of the CE mark shall not be less than 5mm, and if it is reduced or expanded, it should be carried out in proportion.
* The Notified Body (NB) may participate in conformity assessment activities at the design, production or entire (including design and production) stages depending on the conformity assessment procedure adopted. If NB participates in the conformity assessment procedure at the production stage, the number of NB shall be placed after the CE marking. If more than one NB is involved in conformity assessment at the production stage, the CE mark will be followed by several numbers.
* < a href = "http://www.globalgd.com/cerenzhengbiaozhun/" > < strong > CE mark < / strong > < / a > and the serial number of NB cigarettes which can also be used in other countries, That is, if the product is a conformity assessment activity carried out in that country by a notified body in Europe in accordance with the requirements of the Directive, the CE mark may be affixed in that country.
Main applicable instructions:
[√] Machinery Directive 98/37/EC
[2006/42/EC] Effective 29 December 2009, replacing 98/37/EC.
[√] Noise Directive 2000/14/EC, 2005/88/EC (This product falls within the scope of Article 12 of the Noise Directive and requires mandatory certification by a notified body)
[√] Electromagnetic Compatibility Directive 2004/108/EC
Major test items or reports to be completed for certification:
- Type approval certificate for engine according to 97/68/EC, i.e. e-mark certificate;
- Experimental reports obtained from the rollover protection device;
- Experimental report obtained from the fall protection device;
- Experimental reports obtained for the braking system;
- Noise test report at the operating position;
- Environmental noise test report of the machine;
- Provide the EMC test report of the whole machine or the electrical parts used in the whole machine have obtained CE certification;
- Vibration test report.
