Construction machinery exports to Europe need to do CE certification and do related test projects in accordance with the standards. That Construction machinery CE certification agency requirements and corresponding standards are what? Want to know with the ce certification body to understand it!

1. EN474-1 General standard for earthmoving machinery, applicable to excavators, loaders, cranes and other basic construction machinery, but not applicable to road rollers and drilling RIGS.

2. EN474-2 to EN474-12 is suitable for specialized construction machinery, the requirements of which do not repeat the requirements of EN474-1 but add special requirements, and when the requirements conflict, the standard takes precedence over EN474-1.

3. When the total weight of the machine is greater than 1500KG, a cab is required, and the cab size requirements are ISO3411-2007.

4. Safety glass is recommended to use E-MARK certification.

5. The layout of the control device in the cab shall be in accordance with EN ISO6682:1995.

6. Engine emissions at least Euro III, provide test reports or certificates.

7. Is there a storage box in the cab for storing instructions or instructions? It is recommended to lock it. If the cab can be locked, the case can be unlocked.

8. No sharp corners in the cab.

9. The cab shall be equipped with air conditioning, and the ventilation and heating capacity of air conditioning shall meet the requirements of ISO 10263 series. heating heating requires a temperature rise of at least 25 degrees within 30 minutes, and Ventilation capacity is required to be 43 cubic meters/hour.

10. The cab is recommended to have a side door, and provide a glass breaking hammer, the cab door size requirements see EN ISO2867:2006.

11. Emergency exit signs are provided near the glass breaking hammer. See EN 61310-1:1995 for all relevant signs.

12. The cab should have a defrosting system, either through a heating system or a special defrosting device, see ISO 10263-5:2007.

13. If the construction machinery is equipped with a pressurization system, it must be at least 50pa, as required by ISO/DIS 10263-3:2007.

14. Anti-tipping protection device shall comply with EN3471:2008.

15. The anti-drop protection device shall comply with ENISO3449:2008, and the construction machinery with power exceeding 15KW shall have FOPS.

16. FOPS are not usually used for the following machinery: Scrapers(Scrapers)pipelayers(pipes)trenchers(trenchers) landfill compactors excavators(excavators)rollers.

17. The size and adjustment of the seat should be ergonomic, specifically see ISO11112-1995.

18. Seat vibration should comply with EN ISO7096: 2000, with particular emphasis on seat vibration and engine emissions, as well as air conditioning systems, This is also some domestic small loader < strong > < a href = "http://www.globalgd.com/CErenzhengjieshao/" > CE certification < / a > < / strong >.

19. The safety belt requires a width of at least 46mm, high strength, corrosion resistance, anti-aging, flame retardant and other characteristics, in line with the European human body size (ISO 34110), open the safety belt from the buckle of the force of at least 10N, not more than 130N. See EN ISO6683:2005 for details.

20. See ISO 10998:2004 for control and indication buttons.

21. Operation marks are in accordance with ISO 6405-1:2004 + A1:2010, ISO 6405-2:2003.

22. Start and stop buttons should comply with ISO10264:1990.

23. The panel requires that the panel instructions can be seen during the day and night, and the color difference is compared to prevent dazzling. Button color requirements: green - normal operation, red - abnormal operation, yellow - between green and red. See ISO 6011:2003 for requirements.

24. Brake steering system: Rubber tire driving in accordance with EN12643:1997 + A1:2008, parking brake system EN ISO3450-2008.

25. Visibility visibility conforms to EN5006:2006.

26. Rearview mirrors comply with ISO14401-1:2004 and ISO14401-2:2004.

27. The lighting layout is in accordance with EN12509:2004.

The copyright of the article belongs to Dongguan Xingyuan Technical Service Co., LTD., if you need non-commercial reprinting, please keep your signature. For commercial reprinting and publishing, please contact us directly.